Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
Model Railroad Control Systems

CMRI Adapters

$5.00

CMRI Adapters

$5.00
SKU:
RJ45Res_BB_P6
Weight:
0.10 LBS
Shipping:
Free Shipping
Quantity:
Share

Product Description

These adapters plug onto Dr. Chubb's classic CMRI style Molex male connectors (as used on SMINI, DIN 24/32 and DOUT 24/32) and convert to RJ45.  3.5 mm or 2.54 (0.100")mm Screw Terminals may be used in place of the female Molex connectors.  Adapters are available with and without pads for dropping resistors (for use with Signals) and as inverting converters.  Bare Boards are available, panelized with 3 or 6 boards per panel, depending on size.

The Improved Molex RJ-45 has pads for female Molex 0.156, 3.5mm and 2.54mm (0.100") screw terminals as well as pads for limiting resistors (you cut the thru traces and solder in the values of 1/4 or 1/8 watt resistors you need) for signals.

The Classic Molex RJ-45 has pads for female Molex 0.156, 3.5mm and 0.100 screw terminals (no resistor pads).

The Inverting Molex RJ-45 has an octal inverter on board for use with common-cathode signals, it also has a terminal block for daisy-chaining +5 logic voltage and ground.

The Molex to 3.5mm screw terminal boards are useful if you want to terminate classic CMRI boards on screw terminals.

See the product pages in the links above (green) for Assembly Instructions and CAD files.

 

Product Reviews

Find Similar Products by Category