I have 2 ***USED*** Logic Rail Fast Clock Displays for NCE ONLY (Not part of our Wifi Clock System). They plug into the NCE CAB Bus and display the system time. These were removed from service working. The Displays are in Custom Cases with Red Shields. The pric..

Price: $75.00

(Used) Delrin D Rings. Used by telecom installers to organize cable runs. Hang these from your benchwork to organize cable runs. Open slot makes it easy to add more wires later, slippery Delrin makes pulling easy. Good for DCC or Signal wiring. Sold in 10 packs. ..

Price: $5.00

USB to 5.5 x 2.1mm adapter.

This is handy if you need to power a device with a 5.5 x 2.1mm "barrel jack" and have a spare USB cell phone charger, or a p..

Price: $5.00

The LightPick "Stubby" is a shorter version of our popular "LightPick" the flashlight uses a single AAA battery, resulting in a shorter overall pick. This is great for operating in close clearances such as on multideck layouts and under simulated wires. The "Stub..

Price: $13.00

Looking for a Holiday Gift for the Operator who has everything? How about our Operators tool kit? It's got:

1. A
   ]]>

   Looking for a Holiday Gift for the Operator who has everything? How about our Operators tool kit? It's got:

   1. A
      ]]> Looking for a Holiday Gift for the Operator who has everything? How about our Operators tool kit? It's got:
      1. A https://www.modelrailroadcontrolsystems.com/lightpick-3-way-bundle/

         Not Sure which LightPick is right for you? Try our 3 way bundle which consists of one flashlight a one of each style of Pick: skewer, tapestry needle and dental pick.
         

         Price: $23.00

         ]]>

         Not Sure which LightPick is right for you? Try our 3 way bundle which consists of one flashlight a one of each style of Pick: skewer, tapestry needle and dental pick.
         

         Price: $23.00

         ]]> Not Sure which LightPick is right for you? Try our 3 way bundle which consists of one flashlight a one of each style of Pick: skewer, tapestry needle and dental pick.
         
         ]]> https://www.modelrailroadcontrolsystems.com/lightpick/ Wed, 24 Jul 2024 15:24:53 +0000 https://www.modelrailroadcontrolsystems.com/lightpick/

         Many operators prefer to use a "pick" to uncouple cars rather than using magnets. However it is often hard to see the couplers particularly in the back of layout shelves. The Lightpick integrates the pick and a small but bright flashlight so that you can easily s..

         Price: $13.00

         ]]>

         Many operators prefer to use a "pick" to uncouple cars rather than using magnets. However it is often hard to see the couplers particularly in the back of layout shelves. The Lightpick integrates the pick and a small but bright flashlight so that you can easily s..

         Price: $13.00

         ]]> Many operators prefer to use a "pick" to uncouple cars rather than using magnets. However it is often hard to see the couplers particularly in the back of layout shelves. The Lightpick integrates the pick and a small but bright flashlight so that you can easily s..]]> https://www.modelrailroadcontrolsystems.com/advanced-bicolor-occupancy-display/ Wed, 29 Nov 2023 21:51:07 +0000 https://www.modelrailroadcontrolsystems.com/advanced-bicolor-occupancy-display/

         This is an improved version of the BiColor Led Occupancy Display board. The key improvement is the addition of a resistor pack in series with the Red LED cathode s..

         Price: $6.00

         ]]>

         This is an improved version of the BiColor Led Occupancy Display board. The key improvement is the addition of a resistor pack in series with the Red LED cathode s..

         Price: $6.00

         ]]> This is an improved version of the BiColor Led Occupancy Display board. The key improvement is the addition of a resistor pack in series with the Red LED cathode s..]]> https://www.modelrailroadcontrolsystems.com/mp10-mount-for-new-installs/ Wed, 30 Aug 2023 20:24:33 +0000 https://www.modelrailroadcontrolsystems.com/mp10-mount-for-new-installs/

         Laser cut plywood mounting adapter for MP10. MP10 screws to the adapter with 2 screws (provided) and the mount has vertical and horizontal slots for #4 screws so you can adjust in place. Also available as a bundle with the MP10.

         Price: $2.00

         ]]>

         Laser cut plywood mounting adapter for MP10. MP10 screws to the adapter with 2 screws (provided) and the mount has vertical and horizontal slots for #4 screws so you can adjust in place. Also available as a bundle with the MP10.

         Price: $2.00

         ]]> Laser cut plywood mounting adapter for MP10. MP10 screws to the adapter with 2 screws (provided) and the mount has vertical and horizontal slots for #4 screws so you can adjust in place. Also available as a bundle with the MP10.
         ]]>