Looking for a Holiday Gift for the Operator who has everything? How about our Operators tool kit? It's got:

1. A
   ]]>

   Looking for a Holiday Gift for the Operator who has everything? How about our Operators tool kit? It's got:

   1. A
      ]]> Looking for a Holiday Gift for the Operator who has everything? How about our Operators tool kit? It's got:
      1. A https://www.modelrailroadcontrolsystems.com/loco-shield-panel-of-4-with-rj-connectors/

         SKU for Bob and Vince. 1 Panel of 4 Loco-Shields and 8 RJ12 (6P6C RJ Jack). You assemble.

         Price: $38.00

         ]]>

         SKU for Bob and Vince. 1 Panel of 4 Loco-Shields and 8 RJ12 (6P6C RJ Jack). You assemble.

         Price: $38.00

         ]]> SKU for Bob and Vince. 1 Panel of 4 Loco-Shields and 8 RJ12 (6P6C RJ Jack). You assemble.
         ]]> https://www.modelrailroadcontrolsystems.com/advanced-bicolor-occupancy-display/ Wed, 29 Nov 2023 21:51:07 +0000 https://www.modelrailroadcontrolsystems.com/advanced-bicolor-occupancy-display/

         This is an improved version of the BiColor Led Occupancy Display board. The key improvement is the addition of a resistor pack in series with the Red LED cathode s..

         Price: $6.00

         ]]>

         This is an improved version of the BiColor Led Occupancy Display board. The key improvement is the addition of a resistor pack in series with the Red LED cathode s..

         Price: $6.00

         ]]> This is an improved version of the BiColor Led Occupancy Display board. The key improvement is the addition of a resistor pack in series with the Red LED cathode s..]]> https://www.modelrailroadcontrolsystems.com/bicolor-led-occupancy-display-panel-of-4/ Wed, 29 Nov 2023 16:00:56 +0000 https://www.modelrailroadcontrolsystems.com/bicolor-led-occupancy-display-panel-of-4/

         I did this board for a regular customer who wanted to use an occupancy detector (like a cpOD or DCC-OD) to drive a bicolor LED indication on a control panel. The panel shows green while the track is vacant and goes to red when the track is occupied. Each board ca..

         Price: $6.00

         ]]>

         I did this board for a regular customer who wanted to use an occupancy detector (like a cpOD or DCC-OD) to drive a bicolor LED indication on a control panel. The panel shows green while the track is vacant and goes to red when the track is occupied. Each board ca..

         Price: $6.00

         ]]> I did this board for a regular customer who wanted to use an occupancy detector (like a cpOD or DCC-OD) to drive a bicolor LED indication on a control panel. The panel shows green while the track is vacant and goes to red when the track is occupied. Each board ca..]]> https://www.modelrailroadcontrolsystems.com/signal-base-for-showcase-miniatures-signals/ Tue, 08 Aug 2023 16:40:56 +0000 https://www.modelrailroadcontrolsystems.com/signal-base-for-showcase-miniatures-signals/

         Our friends at Showcase Miniatures make a fantastic line of Signal kits. Fine scale signals usually use 30Ga magnet wire and connecting them under the layout can..

         Price: $6.00

         ]]>

         Our friends at Showcase Miniatures make a fantastic line of Signal kits. Fine scale signals usually use 30Ga magnet wire and connecting them under the layout can..

         Price: $6.00

         ]]> Our friends at Showcase Miniatures make a fantastic line of Signal kits. Fine scale signals usually use 30Ga magnet wire and connecting them under the layout can..]]> https://www.modelrailroadcontrolsystems.com/hankscraft-contact-adapter/ Tue, 21 Mar 2023 10:44:08 +0000 https://www.modelrailroadcontrolsystems.com/hankscraft-contact-adapter/

         Allison Dendy requested this handy adapter to hold a micro switch for a Hanlscraft Switch Motor and hold a relay to add a DPDT contact.

          

         Parts available from Jameco (stay tuned). Available as a bare boa..

         Price: $6.00

         ]]>

         Allison Dendy requested this handy adapter to hold a micro switch for a Hanlscraft Switch Motor and hold a relay to add a DPDT contact.

          

         Parts available from Jameco (stay tuned). Available as a bare boa..

         Price: $6.00

         ]]> Allison Dendy requested this handy adapter to hold a micro switch for a Hanlscraft Switch Motor and hold a relay to add a DPDT contact.

          

         Parts available from Jameco (stay tuned). Available as a bare boa..]]> https://www.modelrailroadcontrolsystems.com/arduino-nano-grade-crossing-break-out/ Sat, 16 Apr 2022 11:14:41 +0000 https://www.modelrailroadcontrolsystems.com/arduino-nano-grade-crossing-break-out/

         There are many excellent Grade Crossing sketches out there, this board supports Jon Schmidt's sketch.  It features direct detection of photo transistors (no external resistors or comparators required) for the approach and island circuits for a single track.&..

         Price: $54.00

         ]]>

         There are many excellent Grade Crossing sketches out there, this board supports Jon Schmidt's sketch.  It features direct detection of photo transistors (no external resistors or comparators required) for the approach and island circuits for a single track.&..

         Price: $54.00

         ]]> There are many excellent Grade Crossing sketches out there, this board supports Jon Schmidt's sketch.  It features direct detection of photo transistors (no external resistors or comparators required) for the approach and island circuits for a single track.&..]]> https://www.modelrailroadcontrolsystems.com/approach-indicator-controller/ Tue, 28 Dec 2021 17:00:15 +0000 https://www.modelrailroadcontrolsystems.com/approach-indicator-controller/

         The Approach Indicator board alerts a train order operator that a train is on approach (“on the bell”) and that he should contact the Dispatcher to determine if there are additional orders for the train. It can handle up to 4 stations, 2 with 4 photo ..

         Price: $36.99

         ]]>

         The Approach Indicator board alerts a train order operator that a train is on approach (“on the bell”) and that he should contact the Dispatcher to determine if there are additional orders for the train. It can handle up to 4 stations, 2 with 4 photo ..

         Price: $36.99

         ]]> The Approach Indicator board alerts a train order operator that a train is on approach (“on the bell”) and that he should contact the Dispatcher to determine if there are additional orders for the train. It can handle up to 4 stations, 2 with 4 photo ..]]> https://www.modelrailroadcontrolsystems.com/geoff-buznas-dcc-fe-2-front-end/ Mon, 19 Apr 2021 14:45:12 +0000 https://www.modelrailroadcontrolsystems.com/geoff-buznas-dcc-fe-2-front-end/

         This is Geoff's SMA37 DCC front end adapter: "Simple DCC Connections for Wide Decoder Adaptation."  

         <..

         Price: $6.00

         ]]>

         This is Geoff's SMA37 DCC front end adapter: "Simple DCC Connections for Wide Decoder Adaptation."  

         <..

         Price: $6.00

         ]]> This is Geoff's SMA37 DCC front end adapter: "Simple DCC Connections for Wide Decoder Adaptation."  

         <..]]> https://www.modelrailroadcontrolsystems.com/spring-switch-simulator-kit/ Fri, 02 Apr 2021 20:20:22 +0000 https://www.modelrailroadcontrolsystems.com/spring-switch-simulator-kit/

         The Spring Switch Simulator provides the "spring switch" function for one end of a siding. 

         • For a train leaving the siding, a sensor (option or user provided) detects the train as it approaches the end o..

           Price: $23.00

           ]]>

           The Spring Switch Simulator provides the "spring switch" function for one end of a siding. 

           • For a train leaving the siding, a sensor (option or user provided) detects the train as it approaches the end o..

             Price: $23.00

             ]]> The Spring Switch Simulator provides the "spring switch" function for one end of a siding. 
             • For a train leaving the siding, a sensor (option or user provided) detects the train as it approaches the end o..]]>