Categories
Categories
Brands
Brands
- Home
- Switch Motors, Drivers, Mounts etc.
- MP10 Switch Machine
MP10 Switch Machine
Product Description
Special Introductory Pricing through December 31, 2023!
Mounting compatible with Tortoise by Circuitron™ Slow Motion Switch Machine
- Slow motion, high torque
- 4 adjustable throw ranges
- Two auxiliary switching contacts
- Two- wire or three-wire control
- Removable 9 position 3.5mm "Phoenix" Connector for 16-24 AWG wire
- Only 20mm high! Ideal for upper decks and modules.
- Laser cut plywood mounting adapter available
The MP10 combines the functions MP5, while maintaining a competitive price. It is designed as a compatible replacement for the Tortoise by Circuitron™ switch machine, with the same mounting footprint, but a much reduced installation height, however the MP10 is NOT a stall motor: it runs for 3 seconds drawing 100 mA and shuts off, drawing no power when travel is complete in either direction.
The MP10 can be powered via either a Two-wire connection, with movement controlled by the polarity of the power supply,
or by a Three-wire connection, alternately applying power to control movement.
The throw range can be set to 3.5, 6.0, 9.5, or 12.5mm by moving a pin on the internal cam. It can be used for any gauge Z through O.
Tortoise™ Slow Motion Switch Machine is a registered mark of Circuitron Inc, USA and is used here for reference and comparison only.
Wiring and Control Application Note